Phone: 631-996-2690    Fax: 631-996-2693

 

 

Please email webmaster@si-tex.com if you experience difficulties with our website.

 

GPK-11

 

 

Back to

Click here for specifications

 

 

  • Smart SDGPS Sensor Antenna based on a 16 ch. GPS
  • Delivers bettter than 2 meter accuracy
  • Low Profile Housing, Pole or Flush mountable
  • IP67
  • Works with any Si-Tex Chartplotter
  • Outputs NMEA-0183 GGA, RMC, GSA, GSV, TXT
  • Inputs voltage 10v DC to 35v DC @0.8W
  • Works with any Si-Tex unit and any unit requiring NMEA-0183 input of GPS

 

SI-TEX GPK-11 SPECIFICATIONS

Overal Dimensions (x height)

97 x 32 mm (flush/pole/rail mounting)

Weight

160 grams (without cable)

Cable

15 meter 8x28AWG

Input Voltage

10-35V DC

Power Consumption

0.8W max

Electrical Interface

TTL voltage levels, RS-232 polarity

Recieving Method/Frequency

16 channels parallel (up to 3 for WAAS Satellites); 1575.42MhZ (LI, C/A code)

Tome to First Fix (TTFF)

Warm start: 33 seconds (typical); Cold Start: 40 seconds (typical)

Accuracy Position

Less than 2.5m CEPI 5.0m SEP2; GPD: (SA=Off, HDOP<4); Less than 2.0mCEPI 3.0SEP2; DGPS: (SA=OFF, HDOP<4)

Dynamics Acceleration

Strong Signals <=4g; Weak Signals typical 1g

Altitude/Velocity

1800 m/1850Km/h (515 m/sec)

DGPS Format

WAAS; EGNOS; MSAS

Output Format/NMEA Output Messages

NMEA-0193 Baud rate 4800 N81; GGA, RMC, GSA, GSV, TXT

Geodetic Datum

WGS84

Operating Temperature/Storage Temperature

from 0°to +60°C/from -20° to +85°C

Relative Humidity/Water Resistance

95% non-condensing/IPX7