[GPS-20A] [KGP-920] [KGP-913D]

KGP-920
 GPS Navigator 

• Compliant with New IMO
  Meeting with New IMO requirements MSC.112(73) and IEC 61108-1 Ed.2 for SOLAS carriage requirements. Approved for U.S. Coast Guard Module B.
• GNSS sensor of AIS
  The KGP-920 GPS Navigator can be used as a GNSS sensor of AIS.
• SBAS ready
  The satellite based positioning correction system will be fully operated within a few years time. The systems called WAAS (USA) and EGNOS (EU) are in trial phase which services are broadcast now. MSAS (ASIA) is expected soon too.
• Quick positioning
  The true-parallel 18-channel GPS receiver provides precise and quick positioning at any time.
• Optional Beacon DGPS
  The built-in beacon receiver is available as an option. It can be used as a high-accuracy differential GPS navigator.
• Case Dimensions/Weight:  7.5"W x 4.75"H x 3.6"D, 1.9 lbs.

KGP-920 GPS Navigator

GPS Receiver Section

Receiving Frequency

1575.42 MHz ± 1 MHz

Receiving Channel

18-channel parallel

Sensitivity

Better than -130 dBm
(elevation angle: 5° or over)

Position Accuracy

10 m 2drms (GPS), 5 m 2drms (DGPS), 8 m 2drms (SBAS)

Beacon receiver section (with DGPS option kit)

Receiving Frequency

283.5 to 325.0 kHz

Channel Separation

500 Hz step

Sensitivity

2.5 µV/m

Signal Detection (S/N)

Better than 6 dB