KODEN VECTOR PRO SPECIFICATIONS |
Receiver Type |
L1, C/A code, with carrier phase smoothing |
Channels |
12-channel, parallel tracking (10 channel when tracking SBAS) |
Update Rate |
5 Hz position max, 10 Hz heading max |
Horizontal Accuracy |
<1 m 95% (DGPS)*, <5m 95% (autonomous, no SA)** |
Heading Accuracy |
<0.5 degrees rms |
Rate of Turn |
25º/s max |
Pitch / Roll Accuracy |
<1 degree rms typical |
Start-up Time |
<60 s |
Heading Fix |
<20 s |
Satellite Reacquistion |
<1 s |
DIFFERENTIAL BEACON |
Channels |
2-channel, parallel tracking |
Frequency Range |
283.5 to 325 kHz |
Operating Modes |
Automatic and manual |
Sensitivity |
2.5 d mV for 6 dB SNR at 200 bps |
Dynamic Range |
100 dB |
Adjacent Channel Rejection |
61 dB at + 400 Hz offset |
COMMUNICATIONS |
Serial Ports |
3 full duplex RS-232 and 2 half-duplex RS–422 |
Isolation |
All serial ports optically isolated from power supply |
Baud Rates |
4800, 9600, 19200 |
Data I/O Protocol |
NMEA 0183 and SLX binary |
Correction I/O Protocol |
RTCM SC-104 |
Timing Output |
IPPS (HCMOS, active high, rising edge sync, 10 ¥, 10 pF load) |
IPPS Accuracy |
50 ns |
NMEA Heading Messages |
GPGGA, GPGLL, GPGSA, GPGST, GPGSV, GPRMC, GPRRE, GPVTG, GPZDA, RD1, HEHDT, HEROT |
ENVIRONMENTAL |
Operating Temperature |
-30ºC to +70ºC |
Storage Temperature |
-40ºC to +85ºC |
Humidity |
100% condensing |
POWER |
Input Voltage |
8.0 to 40V DC |
Isolated |
Power supply isolated from serial ports |
Reverse Polarity Protectoin |
Yes (but not reverse polarity operation) |
Power Consumption |
<4.5W |
Current Consumption |
<360 mA at 12.0V DC |
MECHANICAL |
Power/Data Connection |
18-pin, Environmentally sealed |
Dimensions |
For Pole Mount: 24.4"W x 6"H x 6.3"D, For Fix Mount: 24.4"W x 6.2"H x 6.3" D (not including
mounts) |
Weight |
3.3 lbs. |
