Parallel 18-channel receiver capabilities and compatibility with both beacons and SBAS (WAAS / EGNOS)
- Accurate positioning - In addition to standard GPS and compensation via beacons, you can also access high precision positioning data via SBAS (WAAS / EGNOS), even when out of range of beacons. This sensor can be connected to the GTD-110/150 chart plotter, the CVG-80/200 plotter sounder or the K-Link System to enable precision DGPS navigation. The increasingly precise positioning data will help you improve safety at sea and locate fishing spots.
- 18-channel reception - This sensor incorporates a parallel 18-channel receiver to enable fast, accurate positioning.
- Automatic station selection - This sensor contains data on every beacon station around the world, enabling it to automatically select the best beacon station at all times.
GPS receiver section
Receiving frequency - 1575.42 MHz ± 1 MHz
Receiving channel - Parallel 18-channel
Sensitivity - -130 dBm
Accuracy
Position
- GPS: 10 m (2 drms, SA=OFF, PDOP≤ 3)
- DGPS: 5 m (2 drms, SA=OFF, PDOP≤ 3)
- SBAS : 8 m (2 drm, SA=OFF, PDOP≤ 3)
Velocity
- 0.1 kt (rms, SA=OFF, PDOP≤ 3)
Beacon receiver section
Receiving frequency - 283.5 to 325.0 kHz
Sensitivity - 10 µV/m or less
Station selection - Auto (required position information) or Manual
Beacon station data (for automatic station selection) - Automatic beacon almanac entry, built-in station list in the world
General
Power supply - 10.8 to 31.2 VDC
Power consumption - 2.5 W or less
Data communication - Asynchronous data communication with RS-422
Output data
Format - NMEA 0183 Ver. 2.0 (NOTE: Ver. 1.5 is available on option basis)
Sentence - GGA, GLL, VTG, RMC, ZDA, GSA, GSV, MSS
Data level - RS-422
Output current - 20 mA or less
